Texas Instruments TI-89 Titanium User Manual

Constants and Measurement Units 269
Converting from One Unit to Another
You can convert from one unit to another in the same category, including any user-
defined units.
For All Units Except Temperature
If you use a unit in a calculation, it is converted and displayed automatically in the
current default unit for that category, unless you use the 4 conversion operator as
described later. The following examples assume that your default units are set to the SI
system of metric units.
Notes:
• Refer to the list of pre-defined units.
• From the UNITS dialog box, you can select available units from a menu.
To multiply 20 times 6 kilometers.
20†6_km
Shown in the default
unit for Length, (_m
in SI system).

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches