Texas Instruments TI-89 Titanium User Manual

Split Screens 499
Using 2nd QUIT to Display the Home Screen
Note: Pressing 2K twice always exits the split screen mode.
When Using a Top-Bottom Split
When you select a TOP-BOTTOM split, remember that the entry line and the toolbar are
always associated with the active application. For example:
If the Home screen:
Pressing
2K:
Is not already displayed Opens the Home screen in place of the
active application.
Is displayed, but is not the active
application
Switches to the Home screen and
makes it the active application.
Is the active application Exits the split screen mode and
displays a full-sized Home screen.
Entry line is for the active
Y= Editor, not the Graph
screen.
Toolbar is for the active
Graph screen, not the
Y= Editor.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches