Text Editor 649
Example
1. Type your script. Press „ and select
1:Command to mark the command lines.
2. Press … and select
1:Script view.
3. Move the cursor to the first command line.
Then press † to execute the command.
Note: Some commands take longer to
execute. Wait until the Busy indicator
disappears before pressing † again.
4. Continue using † to execute each
command, but stop just before executing
the Graph command.
5. Execute the Graph command.
Note: In this example, the Graph
command displays the Graph screen in
place of the Home screen.
6. Press … and select
2:Clear split to return
to a full screen Text Editor.
To Next Page
Loading...
