Texecom Premier 8XP-W - Attribute Modification and SmartKey Functions

Premier 8XP-W & 32XP-W Installation Manual
26
3. Change Device attributes
Device attribute changes should be saved by either pressing the / key after each
device change, or by pressing the / key after scrolling through the devices and
making multiple changes.
Once changed device attributes will be updated on the next successful poll with the receiver,
if however you wish to update the devices immediately please see Update Devices on page
28.
 
 
    
 
  
 
Use 1 & 2 keys t o change device attribut es
1 = AUTO MODE (Default)
2 = ALWAYS AWAKE
  
 
    
  
    
 

/


/



/


/

/

