Texecom Premier 8XP-W - Page 27

Premier 8XP-W & 32XP-W Installation Manual
27
4. Change Premier SmartKey™ attributes
Premier SmartKey™ attribute changes should be saved by either pressing the  key after
each Premier SmartKey™ change, or by pressing the  key after scrolling through the
devices and making multiple changes.
Once changed Premier SmartKey™ attributes will be updated the next time the Premier
SmartKey™ is powered on; if however you wish to update the devices immediately please
see Update Devices on page 28
5. / Key Functions
When in Commission Mode (page 32) pressing the / key will display further
information about the device’s routing information and signal strength.
No Hops
In this example the device is “Home Running”
 
  
1 Hop
In this example the device is hopping through device
16 and the relevant signal strengths are shown
 
 
2 Hops
In this example the device is hopping through device
18 & 6 and the relevant signal strength is shown.
  
 
 
 
   
  
  
   
Use 1 & 2 keys t o change f ob at t ribut es
1 = LED On/Off (Default is On)
2 = Aux Off/On (Default is Off)
*Smart Key at t ribut es will be updated the
next t ime t he f ob is powered up.
  
   

/


/



/


/
