37
TEXI Catenaccio operation manual
(4). Setting of Counter Action
The production counter can be used as the Bottom Thread Counter. In repetition sewing, if a bobbin finishes the sewing time
as set in parameter, the sewing machine will stop sewing. The Bottom Thread Counter uses the subtracting method.
The counters are set as Production Counter (Adding method) at the time of delivery. However, if it is used as the Bottom
Thread Counter (subtracting method), the parameter switch No.18 shall be changed.
Example: change the Production Counter (Adding method) to Bottom Thread Counter (Subtracting method).
1. Press when Sewing LED is off.
2. User can use & to let screen display
parameter code No.18
3. Press to turn on the Sewing LED. Then the set
value of the counter action is displayed in the screen.
4. Set the set value to 1 with
Set value 0：Production Counter;
1：Bottom Thread Counter
5. Press to save the set value and turn off the
Sewing LED
6. Press to end the parameter setting mode and
return to ordinary mode.
To Next Page
Loading...
Need help?
General
