36
TEXI Catenaccio operation manual
8. By using & , user can input “2000” in
the screen Press to return to default setting.
If user presses , the existing operations will be
cancelled and system will return to the status in step 6).
9. Press to turn off the Sewing LED and save
the set value of the 2
nd
stitch.
10. Press to end the parameter setting mode and return to the ordinary status.
(3). Setting on whether to call the pattern number
User sets the machine not to read the inoperative pattern in case the unnecessary pattern is called. Additionally,
the available pattern can be called when necessary.
Emp.: Set the No.2 & No.3 patterns as the inoperative.
1) Press when the Sewing LED is Off.
2) User can use & to let screen display
parameter code No.201.
3) Press to turn on Sewing LED, at the same
time the set value of pattern No.1 is displayed. Set value
1: Readable; 0: Unreadable.
4) Set pattern No. 2 with & .
5) Set the value to 0 with .
6) Set pattern No.3 with & .
7) Set the value to 0 with .
8) Press to save the set value and Turn off the
Sewing LED.
9) Press to end the parameter setting mode and return to ordinary mode.
To Next Page
Loading...
Need help?
General
