Restoring Factory Defaults
From the System menu, choose the Factory Default item and the Reset to
Factory Default screen appears. Press Apply to reset Thecus IP storage factory
default settings.
Problems with Time and Date Settings
The administrator is able to select an NTP Server to keep Thecus IP storage time
synchronized. However, if Thecus IP storage can not access the Internet, you may
encounter a problem when setting the Time and Time Zone. If this happens:
1. Login to the Web Administration Interface.
2. Navigate to System Management>Time.
3. Under NTP Server, select No.
4. Set the Date, Time, and Time Zone.
5. Click Apply.
In addition, if Thecus IP storage is able to access the Internet and you want to keep
the NTP Server clock.isc.org by default, please make sure the DNS Server is
correctly entered, thereby allowing the NTP Server name to correctly resolve. (See
System Network > WAN/LAN1 > DNS Server)
Resetting to factory defaults will not erase the data stored in the hard
disks, but WILL revert all the settings to the factory default values.
To Next Page
Loading...
Need help?
General