Thecus N4100EVO User Manual

43
Sort Descending
Shows logs by date in descending order.
|<< < > >>|
Use the forward ( > >>| ) and backward ( |<< < ) buttons to
browse the log pages.
Refresh the logs.
System Management
The System Management menu gives you a wealth of settings that you can use to
configure your Thecus IP storage system administration functions. You can set up
system time, system notifications, and even upgrade firmware from this menu.
Time: Setting system time
From the time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on the IP STORAGE with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Description
Date
Sets the system date.
Time
Sets the system time.
Time Zone
Sets the system time zone.
Act as NTP Server
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Sync with external NTP
Server
Select YES to allow the IP STORAGE to synchronize with an NTP
server of your choice. Press Apply to change.
WARNING
If an NTP server is selected, please make sure your Thecus IP storage has been
setup to access the NTP server.

Thecus N4100EVO Specifications

General

Brand	Thecus
Model	N4100EVO
Category	Server
Language	English