Notification configuration
From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have the IP STORAGE notify
you in case of any system malfunction. Press Apply to confirm all settings. See
following table for a detailed description of each item.
Notification Configuration
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Set email address to send email.
Receiver‘s E-mail
Address (1,2,3,4)
Add one or more recipient‘s email addresses to receive email
notifications.
Firmware Upgrade
From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button to find the firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
Consult with your mail server administrator for email server
information.
To Next Page
Loading...
