Enable or disable WebDisk support. Enter the port number if
this option is enabled. The port number is default 80.
UPnP
This device supports UPnP Media server, which allows users to play media files with
UPnP client (ex. DMA devices). Enable or disable Universal Plug and Play protocol.
UPnP helps to find the IP address of the Thecus IP storage.
Nsync Target
From the System Network menu, choose the Nsync Target item, and the Nsync
Setting screen appears. Enable or Disable your Nsync Target Server. Press Apply
to confirm your settings.
If the Thecus Nsync feature has chose to use Rsync to replicate data between two
systems. For the target side to allow source cross data, the Rsync target server
needs to assign a username and password for authentication.
Once Nsync Target has been enabled, the other Thecus NAS product is able to
operate remote replication to this NAS system.
To Next Page
Loading...
Need help?
General