Thecus N4100EVO - USB Copy

34
The N4100 Eco will rotate these messages every one-two seconds on the LCD
display.
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB
disks and digital cameras to the Thecus IP storage by press USB copy button. To use
USB copy, follow the steps below:
N0204:
1. Plug your USB device into USB2.0 port on the Front Panel.
2. Press USB copy Button and the N0204 miniNAS will start copying USB disks
connected to the front end USB2.0 port.
3. The USB LED show
 Blinking Green: Copy activity.
 Solid Green: Copy Success.
 Solid Red: Copy Fail.
N2200:
1. Plug your USB device into an available USB port on the Front Panel.
2. Press the ―USB Copy Button”.
3. The N2200 will start copying USB disks connected to the front USB port. The
LCD will display the USB copy progress and result.
USB 2.0 Copy
Button/LED
NOTE
Please use the front USB port when
using USB copy function.