Thecus N4100EVO User Manual

22
N2200:
To connect the N2200 to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the LAN port on the back
panel of the N2200.
2. Connect the provided power cord into the power socket on the back panel.
3. Press the power button boot up the N2200.

Thecus N4100EVO Specifications

General

HDD Bays	4
Maximum Internal Raw Capacity	16 TB (4 x 4 TB)
LAN Ports	2 x Gigabit Ethernet
eSATA Ports	1
HDMI Port	No
Operating System	Thecus OS
RAID Levels	0, 1, 5, 10, JBOD
USB Ports	2 x USB 2.0 (rear)