6. Name your N2200PLUS/EVO,N41OOEVO and configure the network IP
address. If your switch or router is configured as a DHCP Server, configuring
the N2200PLUS/EVO,N4100EVO to automatically obtain an IP address is
recommended. You may also use a static IP address and enter the DNS
Server address manually.
7. Change the default administrator password.
8. Finished! Access the N2200PLUS/EVO,N4100EVO Web Administrator
Interface by pressing the Start Browser button. You can also configure
another N2200PLUS/EVO,N4100EVO at this point by clicking the Setup
Other Device button. Press Exit to exit the wizard.
To Next Page
Loading...
Need help?
General