3. Continue selecting groups and users and assigning them access levels using
the column buttons.
4. To remove a group or user from an access level column, press the Remove
button in that column.
5. When you are finished, press Apply to confirm your ACL settings.
To setup sub-folders ACL, click on ― ‖ symbol to extract sub folders list as screen
shot shows below. You may carry on with same steps as share level ACL setting.
The ACL screen also allows you to search for a particular user. To do this, follow the
steps below:
1. In the blank, enter the name of the user you would like to find.
2. From the drop down select the group you would like to search for the user in.
3. Click Search.
If one user has belonged to more than one group but different privilege than
the priority Deny > Read Only > Writable
The system will list up to 1,000 users from the chosen category. To narrow
your search, enter a search term in the blank provided.
To Next Page
Loading...
