Thecus N4310 Series User Manual

10
Chapter 2: Hardware Installation
Chapter 2: Hardware Installation§
Overview2.1
Your Thecus IP storage is designed for easy installation. To help you get started, the following chapter
will help you quickly get your Thecus IP storage up and running. Please read it carefully to prevent
damaging your unit during installation.
Before You Begin2.2
Before you begin, be sure to take the following precautions:
Read and understand the Safety Warnings outlined in the beginning of the manual.1.
If possible, wear an anti-static wrist strap during installation to prevent static discharge from 2.
damaging the sensitive electronic components on the Thecus IP storage.
Be careful not to use magnetized screwdrivers around the Thecus IP storage’s electronic com-Thecus IP storage’s electronic com-’s electronic com-s electronic com- electronic com-3.
ponents.
Cable Connections2.3
To connect the Thecus IP storage product to your network, follow the steps below:
Connect an Ethernet cable from your network to the LAN port on the back panel of the 1.
Thecus IP storage.
N4310 LAN port
S
Connect the provided power cord into the universal power socket on the back panel. Plug 2.
the other end of the cord into a surge protector socket.
N4310 power socket
S

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English