Thecus N4310 Series User Manual

27
Chapter 3: System Administration
UI Login Function3.3.17
Adjusts UI Login Configuration settings, you can enable/disable the Web Disk, Photo Server and
modules functions, according to your needs.
Networking3.3.18
From the System Management category, choose Networking, and the Networking Configuration
screen appears. This screen displays the network parameters of the global setting and available
network connection. You may change any of these items and press Apply to confirm your settings.
See a description of each item in the following table:
Network Conguration (Global parameter)
Item Description
Host name Host name that identifies the Thecus IP storage on the network.
Domain name Specifies the domain name of Thecus IP storage.
WINS Server
To set a server name for NetBIOS computer.
DNS Mode
Select the DNS server is coming from DHCP server or manual input. A total of 3 DNS
servers can be input. If the DNS setting is chosen from DHCP server, then it will refer to
WAN/LAN1 port.
DNS Server 1,2,3
Domain Name Service (DNS) server IP address.
Network Conguration (NIC port)
Link speed Display associated NIC port link speed.
Link status Display associated NIC port link status.
MAC address MAC address of the network interface.
Jumbo Frame Support Enable or disable Jumbo Frame Support of associate interface on your Thecus IP storage.
IPv4/IPv6 Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
Mode It can choose a static IP or Dynamic IP.
IP IP address of associate NIC interface.
Netmask/Prefix Length Input netmask for IPv4 and Prefix length for IPv6.

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English