EasyManuals Logo

Thecus N4310 Series User Manual

Thecus N4310 Series
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
49
Chapter 3: System Administration
iSCSI 3.4.5
You may specify the space allocated for iSCSI. See the table below to the allowed iSCSI target num- See the table below to the allowed iSCSI target num-See the table below to the allowed iSCSI target num- iSCSI target num-num-
ber per system:
Model N4310
Allowed iSCSI volume 15
iSCSI Target
To add iSCSI target volume, click iSCSI with associated RAID volume from its drop down list and
select the desired RAID volume.
iSCSI Target
Item Description
Add Click to allocate space to iSCSI target from associated RAID volume.
Modify Click this to modify the iSCSI Target.
Advanced
There are 3 options (iSCSI CRC/Checksum, Max Connections, Error Recovery Level) These currently
allow the Admin to Enable/Disable the Thecus IP storage associated with the iSCSI setting.
Delete Click this to delete the iSCSI Target.
Allocating Space for iSCSI Volume
To allocate space for an iSCSI target on the current RAID volume, follow the steps below:
Under the iSCSI Target List, select iSCSI Target then click Add.1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N4310 Series and is the answer not in the manual?

Thecus N4310 Series Specifications

General IconGeneral
BrandThecus
ModelN4310 Series
CategoryNetwork Storage Server
LanguageEnglish

Related product manuals