Gateway Gateway for associate NIC.
Default gateway It can be chosen from a drop down list of default gateway that’s been used for the Thecus IP
storage.
Only use Jumbo Frame settings when operating in a Gigabit •
environment where all other clients have Jumbo Frame Setting
enabled.
Proper DNS setting is vital to networks services, such as SMTP and •
NTP.
Most faster Ethernet (10/100) Switches/Routers do not support Jumbo
Frame and will not be able to connect to your Thecus NAS after Jumbo
Frame is turned on.
Dual Power 3.3.19
The Thecus N4310 supports the optional use of Dual Power inputs. Once this function is enabled, the
system will check whether both power jacks are connected properly and are supplying the correct
voltage.
When both are connected and operating properly, the Dual Power window will list their status as
“Normal”.
If one of the power adaptors is not installed or abnormal voltage is detected, then the system will list
that input as “Failed”.
To Next Page
Loading...
