Thecus N4310 Series User Manual

51
Chapter 3: System Administration
The iSCSI target volume creation will associate at least one LUN together.
It can be assigned either “Thin-Provisioning” or “Instant Allocation”.
Enable the iSCSI Target Volume by selecting Enable.2.
Enter a Target Name. This will be used by the Stackable NAS function to identify this export 3.
share.
Choose the current year from the Year dropdown.4.
Choose the current month from the Month dropdown.5.
Choose to enable CHAP authentication or choose None.6.
If you’ve enabled CHAP authentication, enter a username and a password. Confirm your cho-7.
sen password be reentering it in the Password Confirm box.
Choose Thin-Provision or Instant Allocation8.
Enter a LUN Name.9.
Designate the percentage to be allocated from the Allocation drag bar.10.
When iSCSI target volume has been created, the LUN ID is configurable from 0 to 254 with a 11.
default of the next available number in ascending numerical order. The LUN ID is unique and
cannot be duplicated.
Choose [ 4K ] block size to have iSCSI target volume over 2TB barrier or [ 512 Bytes ] block size 12.
in some application needed.
Click OK to create the iSCSI volume.13.
Modify iSCSI Volume•
To modify iSCSI target on the current RAID volume, follow the steps below:
Under the iSCSI Target List, click Modify.1.
The Modify iSCSI Volume screen appears.
Modify your settings. Press ok to change.2.

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English