Thecus N4310 Series User Manual

116
Chapter 3: System Administration
Windows XP SP2•
To set up the Printer Server in Windows XP SP2, follow the steps below:
Connect the USB printer to one of the USB ports (preferably the rear USB ports; front USB 1.
ports can be used for external HDD enclosures).
Go to Start > Printers and Faxes.2.
Click on File > Add Printer.3.
The Add Printer Wizard appears on your screen. Click Next.4.
Select the “A network printer, or a printer attached to another computer” option.5.
Select “Connect to a printer on the Internet or on a home or office network”, and enter “http://6.
Thecus IP storage IP_ADDRESS:631/printers/usb-printer” into the URL field.
Your Windows system will ask you to install drivers for your printer. Select the correct driver 7.
for your printer.
Your Windows system will ask you if you want to set this printer as “Default Printer”. Select Yes 8.
and all your print jobs will be submitted to this printer by default. Click Next.
Click Finish.9.
Note that if a multi-function (all-in-one) printer is attached to the Thecus
IP Storage, usually only the printing and fax functions will work. Other
features, such as scanning, will probably not function.
Windows Vista•
To set up the Printer Server in Windows Vista, follow the steps below:
Open Printer Folder from the Control Panel. 1.
Click the right mouse button in anywhere on the Printers folder and then select Add Printer. 2.

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English