Thecus N4310 Series User Manual

108
Chapter 3: System Administration
task list will have created task listed. To start the iSCSI volume backup, select the task and click “Start”
from task bar.
Once “Start” click, the associated iSCSI volume will not allow to I/O during backup processing. And
the task status will change to ‘Processing”.
States change to “Finish” after task complete.
From the RAID volume folder ‘andy_local’, it has backup iSCSI volume file stored. This backup iSCSI
volume file is needed while it required import to storage. Next topic will describe about this.

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English