ACL setting
Item Description
Deny Denies access to users or groups who are displayed in this column.
Read Only Provides Read Only access to users or groups who are displayed in this column.
Writable Provides Write access to users or groups who are displayed in this column.
Recursive Enable to inherit the access right for all its sub-folders.
To configure folder access, follow the steps below:
On the ACL screen, all network groups and users are listed in the left hand column. Select a 1.
group or user from this list.
With the group or user selected, press one of the buttons from the three access level col-2.
umns at the top. The group or user then appears in that column and has that level of access
to the folder.
Continue selecting groups and users and assigning them access levels using the column but-3.
tons.
To remove a group or user from an access level column, press the Remove button in that 4.
column.
When you are finished, press Apply to confirm your ACL settings5.
If one user has belonged to more than one group with different
privilege, then the priority of the privilege will be as followed:
Writable > Read Only > Deny
To setup sub-folders ACL, click on “ ” symbol to extract sub folders list as screen shot shows below.
You may carry on with same steps as share level ACL setting.
To Next Page
Loading...
Need help?
General
