Thecus N4310 Series User Manual

76
Chapter 3: System Administration
DDNS3.6.10
To set up a server on the Internet and enable the users to connect to it easily, a fixed and easy-to
remember host name is often required. However, if the ISP provides only dynamic IP address, the IP
address of the server will change from time to time and is difficult to recall. You can enable the DDNS
service to solve the problem.
After enabling the DDNS service of the NAS, whenever the NAS restarts or the IP address is changed,
the NAS will notify the DDNS provider immediately to record the new IP address. When the user tries
to connect to the NAS by the host name, the DDNS will transfer the recorded IP address to the user.
The NAS supports the DDNS providers:
DyDNS.org(Dynamic DNS),DyDNS.org(Custom DNS),DyDNS.org(Static DNS),
www.zoneedit.com,www.no-ip.com.
A description for each item as following:
DDNS
Item Description
DDNS Service Enable or disable DDNS service.
Register Choose the service provider from the drop down list.
User name Input user name with DDNS registry.
Password Input password with DDNS registry.
Domain name Input domain name with DDNS registry.
Apply Click “Apply” to confirm the changes.

Thecus N4310 Series Specifications

General

Brand	Thecus
Model	N4310 Series
Category	Network Storage Server
Language	English