WARNINGS
Read and understand this entire Manual and your employer’s safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
Power-Master Inverter Welding Power Supply
Service Manual Number 0-4938B for:
Power-Master 500 Part Number 100060, 100095 (CCC)
Power-Master 500P Part Number 100054, 100096 (CCC)
Power-Master 350 Part Number 100078, 100101 (CCC), 100099 (CSA)
Power-Master 350P Part Number 100079, 100102 (CCC), 100100 (CSA)
Published by:
Thermadyne Industries, Inc.
82 Benning Street
West Lebanon, New Hampshire, USA 03784
(603) 298-5711
www.thermalarc.com
Copyright 2006 by
Thermadyne Industries, Inc.
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the pub-
lisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
Publication Date: March 17, 2006
Record the following information for Warranty purposes:
Where Purchased: ___________________________________
Purchase Date: ___________________________________
Equipment Serial #: ___________________________________
i
To Next Page
Loading...
