Manual 0-2725 A-5 APPENDIX
J4-1 36 VAC from Gate Driver PC Board (J9-1)
J4-2 36 VAC to Gate Drive PC Board (J9-2)
J4-3 36 VAC from Gate Drive PC Board (J9-3)
J4-4 36 VAC to Gate Drive PC Board (J9-4)
J4-5 Ground to Gate Drive PC Board (J9-5)
J4-6 36 VAC to Gate Drive PC Board (J9-6)
J4-7 Ground to Gate Drive PC Board (J9-7)
J4-8 36 VAC to Gate Drive PC Board (J9-8)
J4-9 Return for Temperature Switch from Gate Drive PC Board (J9-9)
J4-10 Over Temperature Logic Level from Gate Drive PC Board (J9-10)
J4-11 Return for Master Enable Signal from Gate Drive PC Board (J9-11)
J4-12 Logic Level Master Enable Signal to Gate Driver PC Board (J9-12)
J4-13 PWM Enable Return to Gate Drive PC Board (J9-13)
J4-14 Logic Level PWM Enable Signal to Gate Drive PC Board (J9-14)
J4-15 PSR Return from Gate Drive PC Board (J9-15)
J4-16 PSR Signal from Gate Drive PC Board (J9-16)
J4-17 Return for Demand to Gate Drive PC Board (J9-17)
J4-18 Demand Signal to Gate Drive PC Board (J9-18)
J4-19 Return for Demand to Gate Drive PC Board (J9-19)
J4-20 Not Used
J5-1 36 VAC to CD PC Board (J11-1)
J5-2 Return to CD PC Board (J11-2)
J5-3 36 VAC to CD PC Board (J11-3)
J5-4 CD Enable Signal to CD PC Board (J11-4)
J5-5 CD Enable Return to CD PC Board (J11-5)
J5-6 +18 vdc to PCR Relay
J5-7 PCR Signal to PCR Relay
J5-8 Torch Switch to Pilot/Output PC Board (J13-1)
J5-9 Torch Switch Return to Pilot/Output PC Board (J13-2)
J5-10 OK-To-Move Signal to Pilot/Output PC Board (J13-4)
J5-11 +18 vdc to Pilot/Output PC Board (J13-3)
J5-12 Return
J5-13 Not Used
J5-14 From Pilot/Output PC Board to Sense Drag Cutting
J5-15 Not Used
J5-16 From Pilot/Output PC Board to Sense DC
J10-1 Inrush Signal to Input PC Board (J16-1)
J10-2 +18 VDC to Input PC Board for Relays (J16-2)
TP1 Logic Ground
TP2 +18 VDC
TP3 +18 VDC
TP4 Not Used
TP5 Not Used
TP6 +12 VDC
TP7 Not Used
TP8 DC Enable
D5 Torch Switch Enable Indicator
D15 CD Enable Indicator
D31 CSR Indicator
D33 Pilot On Indicator
D34 AC OK Indicator
D35 Drag On Indicator
To Next Page
Loading...
Need help?
General
