TK 56704-1-OP-EN
31
The display will briefly show PROGRAMMING LANGUAGE - PLEASE WAIT
in the new language as shown (Figure 19, p. 31).
Figure 19. Programming Language
The new language is confirmed, and the Standard Display will appear in the
new language as shown (Figure 20, p. 31). The unit is ready to run.
Figure 20. Truck Premium HMI Control Panel
Should it be necessary to change to another language at any time, return to
the Standard Display and then press and hold the first and last soft keys for
five seconds as shown (Figure 21, p. 31). The Standard Display below is
shown in Deutsch (German).
Figure 21. First and Last Soft Keys
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
