52
TK 56704-1-OP-EN
NNoottee:: The Standard Display in Deutsch (German) is the same as in English.
The unit is ready to run.
Figure 58. Standard Display
Repeat the process to select a different language. To select a different Main
Menu item, press the NEXT key. To return to the Standard Display press the
EXIT key.
IImmppoorrttaanntt:: If necessary, English and all other languages in the installed HMI
Control Panel software revision may be accessed from the
Standard Display.
Should it be necessary to change to another language at any time, return to
the Standard Display and press and hold the first and last soft keys for five
seconds as shown (Figure 59, p. 52).
Figure 59. Standard Display
After five seconds, the Language Menu will appear in the current language
as shown (Figure 60, p. 53). Press the + or - keys to select the desired
language. When the desired language is shown, press the YES key to
confirm the choice. All languages in the installed HMI Control Panel software
can be selected using this method.
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
