5
1.6 External Features
Components
# Description
1 Printer port: Provides
output for optional external
thermal printer. Connects to
special cable which has 3-pin
round connector on flowmeter
end and DB9 connector on
printer end.
2 ON/OFF keys
3 Battery Low light: Activates
after approximately 7 or 14
hours of operation (depending
on battery type). Automatic
shutdown after approximately 1
additional hour.
4 Charging light
5 Instrument on light
6 Fuse: 3-A, 250 V. Protects
flowmeter from battery
overcurrent or short circuits
7 Liquid crystal display (LCD):
Displays configuration
selections, flow rate, totalized
flow, etc.
8 Keypad: Use to enter
configuration parameters and
control flowmeter functions.
9 Downstream transducer
connector
10 Upstream transducer
connector
11 Breakout box interface
connector: Connects flowmeter
to breakout box.
FIGURE 1.6
To Next Page
Loading...
