32
.....Additional setup menus within the PRINT submenu
1. Print Log Setup menu continued
d. Enter the print interval in whole seconds, and press ENTER.
Operation errors may occur if the log interval is too short to allow the selected
data to be printed. If the print interval is interrupted by a power loss, the printer
resumes at the specified interval after power is restored.
2. Print Settings menu (97): Print all parameters associated with the pipe, liner, fluid, transducer, and
flow menus (10-35).
3. Print Diagnostics menu (98): Print all parameters associated with the DIAGNOSTICS submenu
(90-94).
4. Print Current Screen menu (99): Print the current display.
FIGURES 3.18-A (LEFT) & 3.18-B (RIGHT)
To Next Page
Loading...
