3-2
SPECIFICATIONS & MAINTENANCE 3.1
Chain Size ............................................................. ANSI 60HT
Approved Chain Manufacturer .................................... Tsubaki
Lubricating Oil................... 10W30 API Classification SE/CD
Oil Capacity (each)....................................... 7 Liters. (1.9 gal)
Torque Specifications:
Motor Sprocket Bolt..................................... 25 lbs /ft (34 nm)
Wheel Nuts............................ 100 - 110 lbs /ft (135 - 149 nm)
Inspection Cover Nuts................................12 lbs /ft (16.5 nm)
Tire Pressure.................................................. 50 psi (345 Kpa)
Specifications
Maintenance Initial Check (hrs) Check Every (hrs)
Tire Pressure......................... 8............................................ 8
Wheel Nut Torque................ 8............................................ 8
Lubrication Oil.................... 50.......................................150 (*)
Chain Tension...................... 50......................................... 150
Motor Mounting Nuts ......... 50......................................... 150
Axle Bearing Pre-load......... 50......................................... 150
(*) Change every 1000 hours.
To Next Page
Loading...
