Thomas 95 User Manual

2-16
2
TANDEM PUMP REPLACEMENT 2.10
Removal
Begin the pump removal by removing any attachment,
raise the boom arms and engage the boom support pins.
Shut off the engine.
1 Remove the seat and hydrostatic shield.
2 Remove the steering lever linkage. Refer to section 4
for removal and replacement information.
3 Remove the gear pump as out lined in section 2.9.
4 Disconnect all the hydraulic hoses. (fig. C2359,
C2610) Marking the hose and fitting location is recom-
mended to ease re-assembly. Upon re-assembly, torque
the hydraulic fittings and hoses as outlined in the Torque
Chart in Section 8. Cap all open lines and ports.
5 Remove the hydraulic fittings from the tandem pump
to prevent damage while removing pump. Plug all open
ports and keep the fittings in a clean area. Inspect fittings
and o-rings for damage, replace as required.
6 Loosen the mounting bolts retaining the tandem
pump to the engine bellhousing. (fig. C2608, C2609).
7 Attach a lifting device to the tandem pump. The
pump is fairly heavy, approximately 80 lbs. (36 Kg) It is
highly recommended to use a mechanical lifting device to
assist removal of the tandem pump.
8 Remove the 2 rear mounting bolts. (fig. C2608,
C2609) Remove the tandem pump from the loader.
Refer to the Sauer Sundstrand Repair Manual,
(Thomas p / n 44232 or Sauer Sundstrand p /n BLN -
9992), for complete pump servicing.
Thomas does not cover or handle warranty processing
or repair work performed on the Sauer Sundstrand
product. Warranty work can only be approved and
performed by an authorized Sauer Sundstrand dealer.
C2359
C2608
C2610
C2609
Pump mounting bolt
Pump mounting bolts
High pressure hoses
Tandem case drain hose
WARNING
To prevent personal injury never work under the
boom arms without the boom supports engaged.
IMPORTANT
When making repairs to the hydraulic system, keep
the work area and parts clean. Use caps and plugs
on all open lines and ports.
High pressure hoses
CAUTION
To prevent possible personal injury, do not attempt
to lift heavy objects without assistance.

Thomas 95 Specifications

General

Brand	Thomas
Model	95
Category	Compact Loader
Language	English