THOMSON THS210 - Recording and Timeshift

26
7.7.2 Photo Congure
Slide Time: You can adjust the slide show interval to 1~8 seconds.
Slide Mode: You can select one of the 60 slide show eects or Random (mixed
eects).
Aspect Ratio: Keep - displays the picture as its original aspect
Discard - displays the picture in full screen mode.
7.7.3 Movie congure
This subtitle function is only relevant in the Movie menu for movies which contain subtitle les
in .srt or txt format.
During playback, press SUB to select a language and conrm with OK. During playback of
Movie les you can press SUB twice to change the subtitle settings described below:
Subtitle Specic: Choose subtitle size between Small, Normal and Big.
Subtitle BG: Choose subtitle background between White, Transparent, Gray and
Yellow-Green.
Subtitle FontColour: Choose subtitle font colour between Red, Blue, Green, White and
Black.
7.7.4 DVR, Timeshift and Format*
*This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed.
7.7.4.1 Instant recording*
To directly record a programme, press the 4 button to start the recording and press 3 to
quit. During a recording it is possible to press the p/q buttons or the OK and p/q buttons
to change to another channel on the same transponder only. It is not possible to use the 0-9
buttons.
7.7.4.2 Timeshift*
If you want to use the Timeshift function you only need to press 2 in viewing mode. To
playback timeshifted content, press u or 2 again. During playback you can use the 5 6 or 2
buttons. To quit the Timeshift mode, press 3. If you haven’t pressed 3 the Timeshift mode will
be kept in the background. If the channel is changed timeshifted content will only be accessible
from the new selected channel.
7.7.4.3 Timer recording
There are 2 ways to set a timer:
Programming a timer via the EPG
The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then
tu to select a channel. After that, press p/q to select an event. You can book a timer by