THOMSON THS210 - Playback Control and Management

27
English
pressing the OK button. The event data will be applied and you only need to press the p/q
buttons to select Mode and tu to Record. If needed, the parameters for the timer can be
changed as well. Press p/q, tu and use 0-9 to do so. From the EPG channel list view you can
open the Book list with the INFO button, which allows you to open a list of all booked timers.
Programming a timer via the Timer menu
If you want to programme a timer via the timer menu, press the BLUE button to open it. Now
the timer list is displayed. The list is empty if no bookings have been made previously. Press
RED to Add a new timer and congure your timer as explained above. For further details about
this menu, please refer to chapter 7.4.1 Timer (Schedule) in the user manual.
7.7.4.4 Playback
After a recording has been made you will nd the new folder HBDVR created on your external
USB storage device. By pressing the u button in viewing mode you can access this folder
directly. Inside the folder HBDVR the following functions are supported:
OK Starts playback in preview mode.
RED Starts playback in full screen mode.
9 Accesses the parent folder/directory.
YELLOW Marks a recording for deletion. When all recordings you want to
delete are marked, press OK. A message will appear to conrm
deleting. By pressing OK again the recordings will be permanently
deleted from your external USB storage device. Press  if you don’t
want to delete them.
GREEN Opens the keyboard for entering a new name for a selected
recording. In the keyboard, press p/q tu for navigation, to enter
a character press OK. After nishing your changes, select OK and
press the OK button to save the new name. If you want to discard
your changes select Cancel and then press OK.
BLUE Allows you to enter the time to start playback. To enter the desired
time use 0-9 and press OK to start the playback at this time.
*This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed.
7.7.4.5 DVR Congure*
Find technical details about your USB device, like Partitions, Timeshiftsize, Total space and Free
space.
7.7.4.6 Format*
WARNING The format function will delete all data and information from
your USB device or selected partition. STRONG will not take any
responsibility for damaged or lost data on the USB device.