THORLABS DC2200 User Manual

© 2020 Thorlabs GmbH14
DC2200
3.3 Operation
This section is dedicated to the local operation of the DC2200. Thorlabs offers an application
for remote operation as well.
3.3.1 Constant Current Mode
In the Constant Current mode, you can set the LED current to a constant value. This panel
shows the LED type, the allowed max. current (the indicated LED Current Limit is either the cur-
rent limit of the detected LED or the user defined LED current limit - whichever is lower) and the
set value of the LED current, that will be applied when switching on the LED.
DC2200 Constant Current Mode Panel
Set the LED Current
Tap the LED Current line or tap EDIT
Tap the large / or the / buttons
to decrease / increase the LED current. Switch
LED on in order to observe the illumination.
Press to save your setting.
For more convenience, the area of the large /
button can be increased by pressing the
button - the side and the status bar will be hidden:
To return to normal display and make all opera-
tion buttons visible, press the button.
21

THORLABS DC2200 Specifications

General

Brand	THORLABS
Model	DC2200
Category	Controller
Language	English