Name: THORLABS DC2200
Brand: THORLABS
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3 Operating Instruction

3.3.2 Brightness Mode

In this mode, you can set the brightness of the LED. This panel shows the LED type, the al-

lowed max. current (the indicated LED Current Limit is either the current limit of the detected

LED or the user defined LED current limit - whichever is lower) and the set brightness of the

LED current, that will be applied when switching on the LED. The 100% brightness is always re-

lated to the displayed LED current limit.

DC2200 Brightness Mode Panel

Set the LED Brightness

Tap the LED Brightness line or tap EDIT

Tap the large / or the / buttons

to decrease / increase the LED brightness. Switch

LED on in order to observe the illumination.

Press to save your setting.

For more convenience, the area of the large /

button can be increased by pressing the

button - the side and the status bar will be hidden:

To return to normal display and make all opera-

tion buttons visible, press the button.

Questions and Answers:

Need help?

Do you have a question about the THORLABS DC2200 and is the answer not in the manual?

THORLABS DC2200 Specifications

General