THORLABS DCU223 SERIES User Manual

152 DCx camera
© 2010 Thorlabs
7.3.21
is_GetAutoInfo
USB 2.0
USB 2.0
Syntax
INT is_GetAutoInfo (HIDS hCam, UC480_AUTO_INFO* pInfo)
Description
Using the is_GetAutoInfo() function, you can query status information of the auto control features.
This information is written to the _UC480_AUTO_INFO structure.
For further information on automatic control, please refer to the Functions for Automatic Image
Control chapter.
The status information returned in the _UC480_AUTO_INFO structure is only valid if at least one of
the auto control features has been enabled using is_SetAutoParameter() .
Input Parameters
hCam
Camera handle
pinfo
_UC480_AUTO_INFO structure (see below)
Contents of the DCx camera_AUTO_INFO Structure
INT
AutoAbility
Supported auto control features
AC_SHUTTER
Auto Shutter available
AC_SENSOR_SHUTTER
Sensor based Auto Shutter available
AC_FRAMERATE
Auto Frame Rate available
AC_SENSOR_FRAMERATE
Sensor based Auto Frame Rate available
AC_GAIN
Auto Gain available
AC_SENSOR_GAIN
Sensor based Auto Gain available
AC_WHITEBAL
Auto White Balance available
AUTO_BRIGHT_STATUS
sBrightCtrlStatus
See AUTO_BRIGHT_STATUS
AUTO_WB_STATUS
sWBCtrlStatus
See AUTO_WB_STATUS
DWORD
reserved
Reserved space for extensions
70
221

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English