THORLABS DCU223 SERIES User Manual

228 DCx camera
© 2010 Thorlabs
7.3.71
is_SetBadPixelCorrection
USB 2.0
USB 2.0
Syntax
INT is_SetBadPixelCorrection (HIDS hCam, INT nEnable, INT threshold)
Description
is_SetBadPixelCorrection() enables / disables the software correction of sensor hot pixels.
This correction will not work while sub-sampling or binning are enabled or raw Bayer mode is
used.
Input Parameters
hCam
Camera handle
nEnable
IS_BPC_DISABLE
Disables the correction function.
IS_BPC_ENABLE_SOFTWARE
Enables software correction based on the hot pixel list
stored in the EEPROM.
IS_BPC_ENABLE_USER
Enables software correction based on user-defined values.
First, the is_SetBadPixelCorrectionTable() function
must be called.
IS_GET_BPC_MODE
Returns the current mode.
IS_GET_BPC_THRESHOLD
Returns the current threshold value.
threshold
Currently not used
Return Values
IS_SUCCESS
Function executed successfully
IS_NO_SUCCESS
General error message
Current mode when used in connection with
IS_GET_BPC_MODE
Current threshold value when used in connection with
IS_GET_BPC_THRESHOLD
Related Functions
is_LoadBadPixelCorrectionTable()
is_SaveBadPixelCorrectionTable()
is_SetBadPixelCorrectionTable()
229
199
209
229

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English