THORLABS DCU223 SERIES User Manual

15General Information
© 2010 Thorlabs
2.3
System Requirements
For a reliable operation the DCx cameras need the following minimum system requirements:
Table 1: System requirements
Minimum
Recommended
CPU speed
600 MHz
2.8 GHz
Memory (RAM)
256 MB
512 MB
USB host controller
USB 2.0 high speed (480 Mbps)
USB 2.0 high speed (480 Mbps)
Intel
®
or NVIDIA
®
nForce mainboard
chipset
Graphics card
Onboard graphics chip
PCI/PCIe graphics card with
DirectDraw support
DirectX 9.0 or higher
Operating system
Windows 2000 (Service Pack 4)
Windows XP 32 bit (Service Pack 2)
Windows Vista 32 bit
Linux (Kernel 2.6.x)
Windows 7 32 or 64 bit
Windows XP 32 bit (Service Pack 3)
Windows Vista 32 bit (Service Pack 1)
Linux (Kernel 2.6.x)
NOTE
Please make sure that: SP4 for WIN 2000 is installed, SP2 for WIN XP is installed,
the USB 2.0 Port is full powered (500mA) and USB2.0 certified cables are used
2.4
Supported Operating Systems
Table 2 : Supported Operating Systems and Interfaces
OS
Service Packs
Required Patches
Windows 2000
SP4
-
Windows XP
SP1
KB822603
Windows XP
SP3
-
Windows Vista 32-Bit
SP1
-
Windows Vista 64-Bit
SP1
-
Windows 7 32-Bit
-
-
Windows 7 64-Bit
-
-
Linux
Kernel 2.6.9 - 2.6.30
-
Supported Interfaces
Type
Version
Host Controller
Comment
USB
2.0
EHCI
Full support
USB
1.0
OHCI/UHCI
Not supported
NOTE
We strongly recommend using PCs with USB2.0 on board. PCI or PCMCIA USB2.0
adapters may have a lower performance.
Make sure that the USB2.0 interface is ‘full powered’ and can provide 500 mA.

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English