355SDK (Software development Kit)
© 2010 Thorlabs
Blue offset for white balance
control
Minimum gain for white
balance control
0 <= gainMin <=
gainMax <= 100
Maximum gain for white
balance control
0 <= gainMin <=
gainMax <= 100
White balance control speed
X start point of reference AOI
for white balance control
0...(max. w idth
1)
-
Aoi Width)
Y start point of reference AOI
for white balance control
0...(max. height
1)
-
Aoi Height)
Width of reference AOI for
white balance control
Height of reference AOI for
white balance control
Carry out white balance
control once
Sets the digital inputs/outputs
Delay of triggered image
capture in µs
Delay of the flash signal in
µs
Depends on
sensor setting,
can be queried
using
is_SetFlashDelay
()
Duration of the flash signal
in µs
Depends on
sensor setting,
can be queried
using
is_SetFlashDelay
()
1)
This information is provided in Specifications: Sensors chapter.
2)
For the parameters, please refer to the uc480.h header file provided in the \Develop\include folder of the
DCx Camera installation directory (see also Programming Notes ).
3)
Not for DCx cameras.
X
) Function is obsolete, see chapter Obsolete Functions .
255
255
402
339
316