© 2007-2012 Thorlabs GmbH
135Appendix
6.3.7
Mounting Adapter
A mounting adapter is added to each WFS Wavefront Sensor in order to supply
standard threads M4 and UNC8-32 which are compatible to the palette of Thorlabs'
mounts and posts holders.
This adapter plate is already mounted to the bottom side of the Wavefront Sensor
using the 4 screws M3x6 (WFS) or 3 screws M3x6 and 1x M2x6 (WFS10). You can
remove this adapter plate if it is not required.
WFS Adapter Plate