© 2007-2012 Thorlabs GmbH
22 WFS Series
This above procedure repeats for a second time, please answer the questions the
same way, and the WFS10* now is ready for use.
A successful installation is also indicated by the LED at the back side of the
wavefront sensor. It lights up red immediately after connection to the USB bus and
goes to green as soon as the driver software has completed the initialization
process and the instrument becomes ready to use by the application program.
2.6
Start the Application
Access the Application Programs from the START button. Find the
"Programs" "Thorlabs" "Wavefront Sensor" "Wavefront Sensor"
entry, or simply click on the icon on your desktop.
Do not forget to remove the dust cover from the Wavefront Sensor.
Refer for Start the GUI chapter for detailed description.
4
0