51
Setting The ON Time
The time menu allows the TileVision
®
to be programmed to switch on or off at preset times. Options available
are Off, Once, Every Day, Mon~Fri, Mon~Sat, Sat~Sun, Sunday.
1
Press the MENU button.
2
Press the 34 buttons to select the TIME menu.
3
Press the 56 buttons to highlight ON TIME.
4
Press the OK button to display the ON TIME menu.
5
Press the 34 buttons to set the ON TIME to the required setting (Off, Once, Every Day, Mon~Fri, Mon~Sat,
Sat~Sun, Sunday). With the ON TIME set to off the time settings are greyed out.
6
Press the 56 buttons to highlight HOUR.
7
Press the 34 buttons to set the HOUR to the required setting.
6
Press the 56 buttons to highlight MINUTES.
7
Press the 34 buttons to set the MINUTES to the required setting.
6
Press the 56 buttons to highlight the input.
7
Press the 34 buttons to set the input to the required setting (DTV, ATV, Radio, SCART, Component,PC-RGB,
HDMI 1, HDMI 2, AV, Digital Media Player, Satellite).
7a
With the input DTV, ATV, Radio or Satellite selected, the channel can be selected. Press the 56
buttons to highlight the channel.
7b
Press the 34 buttons to select the required channel.
6
Press the 56 buttons to highlight VOLUME.
7
Press the 34 buttons to set the VOLUME to the required setting.
8
Press the MENU button to exit the ON TIME menu.
To Next Page
Loading...
