52
Sleep Timer
The TileVision
®
incorporates a sleep timer which can be set to turn the unit off after a preset time. The
available delay times are:
10, 20, 30, 60, 90, 120, 180, and 240 minutes.
The sleep time can be set as follows:
1
Press the MENU button.
2
Press the 34 buttons to display the TIME menu.
3
Press the 56 buttons to highlight the SLEEP TIMER menu.
4
Press the
OK
button to display the SLEEP TIMER menu.
5
Press the 56 buttons to select the required delay.
6
Press the MENU button to close the SLEEP TIMER menu.
An on-screen countdown will be displayed from 30 seconds before the TileVision
®
switches off.
The TileVision
®
incorporates a auto standby function. If there has been no operation of the TileVision
®
after a
set time the TileVision
®
will switch to standby. Time lengths available, OFF, 3 hours, 4 hours or 5 hours.
1
Press the MENU button.
2
Press the 34 buttons to display the TIME menu.
3
Press the 56 buttons to HIGHLIGHT the AUTO STANDBY menu.
4
Press the
OK
button to display the AUTO STANDBY menu.
5
Press the 56 buttons to select the required delay., OFF, 3 hours, 4 hours or 5 hours.
6
Press the MENU button to close the AUTO STANDBY menu.
An on-screen countdown will be displayed from 30 seconds before the TileVision
®
switches off.
Auto Standby
The Sleep Timer can be changed whilst watching a
programme. Press the Sleep button to sequence
through the delay settings.
To Next Page
Loading...
