Timbery M120 Series - Specifications; Belt Sizes; Blade Sizes

Specifications
2
2-1 doc110819 Specifications
SECTION 2 SPECIFICATIONS
2.1 Belt Sizes
See Table 2-1. Belt sizes for the M120 sawmill are shown below.
2.2 Blade Sizes
See Table 2-2. See the table below for blade specifications for the M120 sawmills.
Description Belt Size Timbery
Part No.
Drive-Side Wheel Belt B69 CARLISLE
SUPER II
X100-905
Idle-Side Wheel Belt
B47.5 M120
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II, or
Browning belts only.
X100-900
TABLE 2-1
Description Thickness Length
M120
0.90 mm (0.035")
1 mm (0.039")
1.07 mm (0.042")
1.14 mm (0.045")
3340-3360 mm
(131.5"-132")
TABLE 2-2