Specifications
2
2-3 doc110819 Specifications
2.5 Noise Level
See Table 2-6. See the table below for the average levels of noise generated by various M120
sawmill models
12
.
Sawmill Noise Level
M120EH5, M120EH7 L
EX8
= 99 dB (A)
M120G9, M120G14 L
EX8
= 106 dB (A)
TABLE 2-6
1.The noise level measurement was taken in accordance with PN-EN ISO 3746 Standard. The noise exposure level given
above concerns an 8-hour work day. Value for associated uncertainty: K=4dB
2. The measured values refer to emission levels, not necessarily to noise levels in the workplace. Although there is a
relation between emission levels and exposure levels, it is not possible to determine with certainty if preventives are
needed or are not needed. The factors affecting a current level of noise exposure during work are inter alia room
characteristics and characteristics of other noise sources, e.g. number of machines and machining operations nearby. Also
the permissible exposure level can vary from country to country. This information, however, will enable the user of the
machine to make a better evaluation of the hazard and risk.
To Next Page