Playback of incoming messages
You can start the playback of incoming messages as well as the abbreviated playback if the
answering mode is on. After the playback, the device switches to the factory pre-set, i. e. the
answering mode is not resumed automatically.
Message function
By the message code, it is possible to leave a message also if the outgoing message of your tip-
tel 330/331 is an "announcement only" message. To do so, call your answering machine and wait
until the announcement starts. Send your 4-digit message code (from 0001 – 9999) by the remo-
te beeper or a tone dialling telephone. A signal tone is heard when the answering machine iden-
tified your message code and you can now record your message. If there is no reaction after
entering the message code, please repeat the entry (press keys for about 1 second, pause of
about 1 second after the individual numbers). The function is deactivated when the code is 0000.
VIP function
When you do not want to be disturbed by the telephone, the answering machine will answer your
calls and still leaves it up to you whether you want to be reached by privileged callers. By the
VIP code your tiptel 330/331 can inform you if a privileged person wants to talk to you personal-
ly. Let the privileged callers have your 4-digit VIP code (0001 – 9999). The caller must enter this
code from the remote beeper or a tone dialling telephone during the OGM or a following mes-
sage. If the VIP code was identified successfully, the microphone of your tiptel 330/331 emits a
60 seconds attention signal. During this time you can pick up the handset and answer the call
personally. This function is switched off when the code is 0000. Even after the 60 seconds, the
caller still has the possibility to leave a message. By pressing the key "8", the caller can stop the
attention signal early.
Programming the message and VIP codes
The message and VIP codes must be entered consecutively. The remote control code, the mes-
sage code and the VIP code must differ in order to be able to distinguish between the functions.
20
Message and VIP function
Telephone answering mode
To Next Page
Loading...
