TIPTEL 330 - Remote Control: Button Functions (Part 1); Message Interrogation and Repeat Functions; Playback Speed and Interrupt Functions

33
Remote interrogation of all messages:
1. Press 8 (stop).
2. Press 3 (ALL).
Remote interrogation of new messages:
1. Press 8 (stop).
2. Press 2 (NEW).
Repeat:
1. Press 5 (playback) during playback.
Switch:
1. Press 4 (rewind) during playback.
2. Press 6 (forward) during playback.
Playback speed:
1. Press 1 (room) during playback.
2. Press 3 (ALL) during playback.
Interrupt playback:
1. Press 8 (stop) during playback.
2. Press 5 (playback).
Remote erase of individual messages:
1. Press
❋❋
and 4 afterwards or
during playback of the message to
be deleted.
The running function stops.
All incoming recordings are played back.
The running function stops.
The new messages recorded after your last
remote interrogation are played back.
The last few seconds of the current inco-
ming recording are played back.
The answering machine positions on the
start of the previous incoming recording.
The answering machine positions on the
start of the next incoming recording.
The playback speed is decreased. The pitch
remains unchanged.
The playback speed is increased. The pitch
remains unchanged.
The playback is interrupted.
The playback is resumed at the same positi-
on.
The selected message is erased.
Remote control: button functions