TIPTEL 330 - Remote Control: Button Functions (Part 2); Erasing Messages and Exchanging OGMs; Remotely Recording Outgoing Messages

Remote erase of all messages:
1. Press 8 (stop).
2. Press
❋❋
and 7 (erase) afterwards.
Remote exchange of OGM:
1. Press 8 (stop).
2. Press 7 (change).
3. Press 1 for OGM 1, 2 for OGM 2 or
3 for OGM 3. Press 4 to select the
pre-recorded OGM.
Remote change of OGM:
1. Press 8 (stop).
2. Press 9 (change).
3. Press 1 for OGM 1, 2 for OGM 2 or
3 for OGM 3.
For an outgoing message "without" inco
-
ming recording:
4. Press # (end) after recording your
OGM.
For an outgoing message "with" inco
-
ming recording:
4. Press 8 (stop) after recording your
OGM.
5. Press # (end) after recording your
final announcement.
The running function stops.
All messages are erased.
The running function stops.
You are asked to select an OGM.
The selected OGM is played back for verifi-
cation purposes. If there is no outgoing
message recorded for the specific OGM
number, you are asked to do this (please
make sure that there is sufficient recording
capacity available).
The running function stops.
You are asked to select an OGM.
You are asked to record the OGM.
The OGM is played back for verification pur-
poses.
You are asked to record your final announ-
cement.
The OGM is played back for verification pur-
poses.
34
Remote control: button functions
Remark:
If you wish to use this OGM as the valid OGM, you have to select is this "remote exchange of
outgoing message".