TIPTEL 330 - Message Transfer: Programming Elements; Programming Elements and Dialling Modes; Number Transfer and Synthesised Messages

The following elements are at your disposal for the programming:
A = Wait for announcement. Your answering machine waits for an outgoing message. The pager
procedure is continued after the OGM ended.
P = Pause. Your answering machine waits 1 to 9 seconds. The duration of the pause can be
determined by the number entered after the special character "P".
N = Free variable parameter for numeric information. The numeric information is sent here.
M = Wait for a multifrequency dialling tone. Your answering machine waits to receive a multifre
quency dialling tone. The determination of the done is done by the sign entered after the
special character "M".
The following signs/keys are possible:
1 ... 0 : Numbers 1 to 0
✱ : star
# : hatch
: joker symbol, wait for a multifrequency dialling tone.
T
elephone number transfer:
If you entered a pager number as target telephone number and if the message transfer function
is active, a caller can even transfer his telephone number or other numeric information. In order
to use this function, the caller must have a tone dialling telephone or a remote beeper. First, the
"✱" button has to be pressed after the outgoing message. Then, the caller can enter his telepho-
ne number and at the end the "#" button has to be pressed to finish the entry.
The following parameters are possible:
Telephone number transfer yes: A telephone number transfer can be conducted.
Telephone number transfer no: A telephone number transfer cannot be conducted.
Number of synthesised voice messages:
In the case that your tiptel 331 shall call a mailbox, there is the option to determine the number
of synthesised voice messages to be between 1 and 10. The charges for mailbox applications
are determined by the number of repetitions.
Message collection:
You can program whether your tiptel 331 executes the message transfer after either each or
every 2nd, 3rd, 4th or 5th incoming message recording.
Dialling mode:
IWV: Pulse dialling mode
MFV: Tone dialling mode
Identification:
If you enter your own telephone number it will be included in the synthesised voice message.
26
Message transfer, general information (only tiptel 331)